Exchangeable buttons with hiding place

structure:

The button consists of two parts: the base that is sewn onto the dress and the cover that is screwed onto the base.

 Attention: 

screw the cover to the base only after sewing the base to the dress, otherwise you risk not to be  able to unscrew it!

How to sew:

To sew the button to the dress, I recommend joining the holes two by two (see photos)to prevent the base from turning on itself when screwing or unscrewing the cover, actually I also tried cross stitching and you shouldn't have any problems anyway.

Size:

I recommend not to decrease the size below 80%.

Print settings:

I recommend using a thickness of 0.16 mm or less and a width of 0.4 mm or less.

Decoration:

I have proposed some examples of decorations that can be applied to the cover using a suitable glue, but I invite you to create your own decoration (I recommend using a thickness between 0.5 and 2 mm) and share them on prusaprinters.org :)