January 21, 2022
Description
Need to print 3 ribs, and minimum 2 spars (recommend 4 or 6). After you print the frame simply cover with plastic wrap, or any other clear plastic. You can add a few spars on top to hold the plastic on, or tape it on, or whatever you choose.
The ribs are too large to fit on an MK2/MK3 bed, so I cut it with a tenon. Simply glue them together after printing. I used super glue (CA Glue) but just about any water resistant glue would work. I've included to the full rib for other larger printers, or if you'd like to cut it to size yourself.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Brainanator
