Laptop/Tablet Stand

Easy to use Laptop/Tablet Stand

There are two available versions: 

Laptop Stand:

Suitable for laptops up to 15"

Assembly

1. Print out all the files in the “Base Parts” folder (here you can choose between the two versions) and the “Laptop Holder Parts” folder (you can customize the nameplate in Prusaslicer by adding text)
2. Start by mounting the plates to the top of the DJ Stand Base with four M3 screws (you can use screws up to M3 x 40 here. I recommend screws like M3 x 18 or M3 x 20)
3. Attach the nameplate to the back of the plates with two M3 screws
4. Insert the DJ Stand Base into the two feet
5. If you want, you can secure the feet to the Base with two M3 screws

Tablet Stand:

Assembly

1. Print out all the files in the “Base Parts” (here you can choose between the two versions) and “Tablet Holder Parts” folders
2. First, attach the ramp to the top of the DJ Stand Base with four M3 screws (you can use screws up to M3 x 40 here. I recommend screws like M3 x 10)
3. Slide the plate through the notches on the ramp. Important: Make sure the three slots in the plate are aligned as shown in the picture!
4. Insert the Fence into the three slots
5. Insert the DJ Stand Base into the two feet
6. If you want, you can secure the feet to the Base with two M3 screws