Mazzer Super Jolly single dose chute

Created for the Mazzer Super Joly, but should also work for Mazzer mini and Mazzer Major.

Limits retention in the big default reservoir usually designed for cafes. 

To install it you will need to unplug the rotation sensor from the main board, as well as the coffee level sensor from the reservoir. Then remove the original reservoir, install the plate using the same bottom and top screws (4 in total) and slide in the chute. 

I added some aluminium tape to the inside of the chute to prevent accumulation along the layer lines but this is optional.

The plate is made to work with standard 58mm dosing cup

Print this without support, the plate in the installed orientation and the chute on its flat side (upside down).

Warning, the main board of the grinder uses mains voltage, do this modification at your own risk, always unplug the grinder when opening it.