Dropshape hanging voronoi Lamp

With the water-drop concept I have created this model that works really well as a hanging lamp.

Instead of PLA I've used a PVB filament because it's easier to postprocess.
Just spray with isopropyl alcohol and let it dry.
That is enough to hide the print lines and get that shiny finish it has.

Infill 15%

Nozzle size 0.4mm,

Layer Height 0.2mm,

Print speed 200 ms,

Supports needed.

Wall count 2

After printed and potprocessed, I opened a small hole in the top so that the light source could be properly allocated to illuminate the room.

I bought the light source on Aliexpress:

https://es.aliexpress.com/item/1005005094341270.html?spm=a2g0o.order_list.pcOrderListRecommend.4.683f194dwdUPEB&gps-id=pcOrderListRecommend&scm=1007.38956.373968.0&scm_id=1007.38956.373968.0&scm-url=1007.38956.373968.0&pvid=cf57ef18-4deb-4bba-9110-2e6426baa5ed&_t=gps-id:pcOrderListRecommend,scm-url:1007.38956.373968.0,pvid:cf57ef18-4deb-4bba-9110-2e6426baa5ed,tpp_buckets:668%232846%238115%232000&pdp_npi=4%40dis%21EUR%217.95%212.71%21%21%2159.91%2120.42%21%4021038e6617311542228006331e6c1b%2112000031635037172%21rec%21ES%211703370847%21X&utparam-url=scene%3ApcOrderListRecommend%7Cquery_from%3A&_gl=1*i9pp5p*_gcl_aw*R0NMLjE3MzAzODgwNzkuQ2owS0NRancxWXk1QmhELUFSSXNBSTBSYlhaM3NidmZBOU45bXFtRFRHZXJrSFJQLXJ1c0FXV3M5R05GX2VxV0ctVXhzNXVTUUxwaEZpY2FBcks3RUFMd193Y0I.*_gcl_dc*R0NMLjE3MzAzODgwNzkuQ2owS0NRancxWXk1QmhELUFSSXNBSTBSYlhaM3NidmZBOU45bXFtRFRHZXJrSFJQLXJ1c0FXV3M5R05GX2VxV0ctVXhzNXVTUUxwaEZpY2FBcks3RUFMd193Y0I.*_gcl_au*MTc4MTE3NDg1Mi4xNzI3OTQ2Nzcx*_ga*MTI3MDYxMDkyMC4xNzI3OTQ2Nzcx*_ga_VED1YSGNC7*MTczMTE1NDIxNC44LjEuMTczMTE1NDI1Ny4xNy4wLjA.