Furniture Front Spacer Set (1mm - 6mm)

Furniture Front Spacer Set (1mm - 6mm) helps with precise front panel alignment during cabinet assembly. Various thicknesses allow for easy spacing adjustments and a perfect fit.

🛠 How to Use

1. Choose the appropriate spacer thickness (1mm - 6mm).
2. Place it between the front panel and the cabinet body.
3. Hold the spacer in place and tighten the mounting screws.
4. Remove the spacer after installation.

🖨 Printing Recommendations

✔ Material: PLA, PETG, or ABS (for durability).
✔ Layer height: 0.2mm for accuracy.
✔ Infill: 15-20% is enough.
✔ Brim/Raft: Not required but can improve bed adhesion.

The spacers are easy to print, require no supports, and can be made in a single print session.

If you find this model useful, leave a 👍 and share your print! 🚀