Ubiquiti Unifi U7 Pro Wall Corner Mount

Allows you to securely mount your Unifi U7 Wall corner mount to an inner corner between two walls.

Print with the largest face (the one with the threaded inserts) on your build plate. Use supports. Whatever material and infill works for you.

You need these threaded inserts – https://a.co/d/8kMELG6

The angles in-set holes were made for #6 Drywall screws. I used 2" long ones. Shorter ones will probably do better.



quoting @notG10_238988 from the comments section : "Just in case the Amazon link ever dies on us, the inserts used are M3x5.7 Brass Heat Set Inserts." – any m3 threaded inserts will work. better if its around 5.7mm, doesnt have to be perfect though depth wise. plastic is plastic and plastic melts and you'll be fine as long as you're now wildly off ~6mm in depth.