Coaster "Happy Planet Earth" No MMU

Just a happy little coaster, being home of your favorite black&hot goodness

How to Print:
General setting: 0.2mm layerhight. Every other setting as you want. Support has to be disabled. No MMU needed. This is going to look strange at first but trust the process. 
See pictures for details.
 

If using prusa slicer:
Load the model and answer the appearing window with “NO”

1) Click the visibility symbol (eye shaped), so that ONLY the parts named “1_Green…” are selected. ALL OTHERS have to be invisible. Slice it and export the file as usual.
 

2) Click the visibility symbol (eye shaped), so that ONLY the part named “2_Blue…” is selected. ALL OTHERS have to be invisible. Slice it and export the file as usual.
 

3) Click the visibility symbol (eye shaped), so that ONLY the parts named “3_Black…” are selected. ALL OTHERS have to be invisible. Slice it and export the file as usual.
 

4) Load all parts to your printer and start printing the green file. DO NOT remove the finished print. Leave it on the print bed.

5) Feed blue filament next. Start printing the blue file. DO NOT remove the finished print. Leave it on the print bed.

6) Feed black filament last. Start printing the black file. Done :)
Note: The infill being visible through the top layer like this, is caused due to printing to fast with to little cooling. If you see something similar, slow down or increase cooling

The cirumstance of this coaster being not only home to your (and mine) most beloved dark liquid, but also litterally being flattened by its shear amount, might be a happy little accident ^^