March 10, 2025
Description
The HappyCam wasn't compatible with my camera as it has a rear mounted heatsink. I took measurements and modeled this from ground up using HappyCam as a reference. I added a cavity and vent to give the heat room to dissipate as this camera gets hot in ambient heat let alone inside an enclosure. Mount to frame with M3x20 and t-nuts and use Voxel3D's lid on the referenced remixed model with an M3x8 screwed directly into plastic. Example video still is mounted on a 300mm Voron 2.4.
Camera I'm using:
License:
Creative Commons — Attribution — Noncommercial
7
ChadwickTheCrab
