• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 1
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 2
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 3
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 4
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 5
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 6
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 7
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 8
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 9
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 10
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Image 11
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 1
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 2
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 3
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 4
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 5
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 6
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 7
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 8
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 9
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 10
"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel 3D Printer File Thumbnail 11

"TAC-WEDGE" - Multidirectional Door Wedge for Emergency Personnel

JR avatarJR

October 26, 2025

printables-icon
DescriptionCommentsTags

Description

Opening a door as a firefighter, law enforcement officer or emergency doctor can be a challenge sometimes- but KEEPING it open can be just as important. If you are tired of jamming doormats and trashcans into doorways then this print is for you!

 

I tried to design a small and powerful doorwedge that can be used on almost every door you could possibly encounter. By rotating the wedge 90 degrees you can cover a wide range from 3 - 50 mm between the door and the floor below and the built-in grooves keep it where you place it. If you thread a piece of paracord through the hole in the model you can simply rip it out to remove it again.

What sets this door wedge apart from other models is the possibility to clip a common 15 mm chemlight / glowstick to the top the make the opened door easy to identify for following personnel, not only in low-light-conditions. You can use different colors (or even IR glowsticks) to mark entries as searched/unsave/retreat/exit, depending on your unit. If you don't need this feature you can simply print a version without it :)

 

Printing:

With enough perimeters and infill you can print this model in PLA or PETG but I recommend a material that can take a hit or two with a boot (ASA, ABS). Print the wedge with the big text (POLICE, EMS …) on the buildplate for maximum strength. You can add a color change after 1,2 mm (6 layer heights) for better visibility. Use dark and light colors for better contrast.

I gave my best to make a version for every possible user out there, therefore I created over 20 different variations of the wedge with text in english and german. If you want or need a different one leave a comment or remix the model. 

If you print this please post a make (I always look for new colors) and tell me if the model needs any adjustments. Happy printing :)

______

Update: 

I added another version I didn't think of, so now you can choose between following texts:

English: Police, EMS, Rescue Service, Fire Brigade, Sheriff

German: Polizei, Rettung, Notarzt, Feuerwehr, THW

Each one is available with and without the glowstick clip and for customization I uploaded blank ones as well.

License:

Creative Commons — Attribution — Noncommercial

Related Models

bakercube preview image

bakercube

iomaa profile image

iomaa

44,453

Book Page Holder V3 preview image

Book Page Holder V3

fifindr profile image

fifindr

3,533

Mini Whistle preview image

Mini Whistle

fifindr profile image

fifindr

3,475

Bottle Opener and Cap GUN! preview image

Bottle Opener and Cap GUN!

3Deddy profile image

3Deddy

44,014

Funnel Tray preview image

Funnel Tray

fifindr profile image

fifindr

3,542

Customizable Spotify Keychain / Tag preview image

Customizable Spotify Keychain / Tag

ewt profile image

ewt

3,057

Mini Tape Gun - Tape Dispenser preview image

Mini Tape Gun - Tape Dispenser

brycelowe profile image

brycelowe

23,762

Drill Paint Mixer preview image

Drill Paint Mixer

fifindr profile image

fifindr

2,485