Mazda 6 GH Mio MiVue mirror holder

EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism
Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder. Removed “long version”.

Mazda 6 GH auto dimming interior mirror holder for Mio MiVue.

Print with ASA or ABS (high temperatures behind the car front glass).
Use at least 25% infill (more is better for small parts).
All should be printed oriented as is for max strength...

2 versions - SHORT and LONG, some parts are common (nut, ball, tip, base).
Warning - at first attach "nut" to "ball", then glue “ball” with some “holder” using superglue ;-)

Use support for:

   holders (normal - snug, just under “T” locking mechanism)
   base (tree)

For "base" add some rubber inside buckle part so you will not scratch mirror holder (there is 1mm clerance reserve for this  - I used old bycicle tube, check photo)

Screws and nuts used:
   2x M4x15, pan head (holder)
   2x M4 nut (2x holder)