Pyramid-shaped LED Lamp

Unique and functional design that requires no supports during printing.

Two customizable profiles:

• Pyramid base with a rough texture.

• Spiral-printed pyramid.

Inspired by the exact proportions of the Great Pyramid of Giza (Khufu).

Note: This design is an evolution of the Pyramid Candle Holder, which you can find here:

https://www.printables.com/model/1152485-pyramid-lamp-holder-candles

Interior space of 60 mm in diameter x 8 mm high for placing the LED lamp.

Assembly video:

Printing instructions for the pyramid lamp model:

The MODIFICADOR.STL file is used in conjunction with BASE.STL to define specific texture areas during the slicing process. Its primary function is to instruct the slicing software that the interior of BASE.STL should not be printed with the rough texture.

Steps to configure the print:

Import BASE.STL and MODIFICADOR.STL into your slicing software.

Adjust MODIFICADOR.STL inside the internal section of BASE.STL.

Configure MODIFICADOR.STL so that it does not inherit the rough texture applied to BASE.STL.

Ensure that BASE.STL is set to print with a rough texture on its exterior surface.

Simplified alternative:
If you prefer a pre-configured setup, you can download the PIRAMIDE_ORCA_BASE.3MF file, where all the necessary printing parameters have already been adjusted. This file includes all the required settings, but you can modify them according to your preferences.