Vacuum Infusion Line Clamp

This vacuum infusion line clamp was designed to be simple to print and use. Each clamp features two ergonomic handles, large enough to give you a good grip, that are turned in tandem to tighten or loosen the clamp. All parts are comfortably printable without the need for supports, with each clamp costing on the order of $2 in filament.

The stl files provided load into your slicer already in the intended print orientation. For the sake of maintaining sufficient strength, I printed my own clamps with 4 perimeters, 6 top/bottom layers, and 15% infill, though you are of course free to use whatever print parameters you think will work.