October 23, 2022
Description
A simple shelf that you can fix using good quality double-sided tape. Make use of that empty space you have!
The shelf is made of two parts so you can swap between different colors, or remove the shelf level for cleaning. You can use them in any square corner measuring at least 130 mm on each side. We probably will add different shapes and sizes! :)
The ones in the pictures were printed without top and bottom layers, using a 15 - 20% honeycomb infill.
Supports:
No
Resolution:
0.2 mm
Infill:
10%
Filament:
Fillamentum PLA Exrafill Vertigo Gray
Notes:
Infill: play with different patterns and percentages to get the best results! We suggest a low infill speed of 40 mm/s or lower for best results
Did you like this design? Follow us on Instagram! We are @twothingies
If you really like what we are doing and want to support us, you could buy us a coffee or two!
Please be aware that our designs are available for free for non-commercial purposes only.
If you would like to sell 3D prints of our designs in your store, you can join one of our membership tiers!
If you have other ideas, we would be happy to discuss that with you! Please send us a message if you are interested at [email protected]
Disclaimer
Due to the different properties of 3D printing filaments and the tolerances of different machines, you might need to scale up or down some of the print files, in case they don't fit when you print them.
License:
Creative Commons — Attribution — Noncommercial
twothingies
