GUITAR & BASS WALL MOUNT

Follow me for more upcoming designs :)

Description

Guitar or Bass Guitar Wall mount

IDEALLY FOR SYMMETRIC GUITAR HEADS (Fender strats etc will fit but you may get a slight tilt due to the headstock geometry not being symmetrical)

2X Options for slim guitars and thicker guitars like acoustics. Option B is offset another 7mm from the wall.

hidden Screw Design. Fix bracket to wall, then slot mount over

43mm and below necks

 - MUST print bracket laying down so layer grain runs the length or the bracket

• MUST print the mount standing up. If not, I can not guarantee the strength of the part. 
• 0.2 layer height
• Minimum of w wall thickness
• 30% triangular or Gyroid infill
• With the holes, PETG Would be best, but PLA should be strong enough
• See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
• Use suitable wall fixings to avoid failure. 

other designs on my profile https://www.printables.com/model/1176378-new-guitar-wall-mount

https://www.printables.com/model/875376-guitar-wall-hanger

https://www.printables.com/model/806357-heavy-duty-guitar-wall-mount-2-sizes