Beadlock rims for 2.2 tires

2.2 beadlock rims.  Used in picture with 120mm tire.

Print the two inner parts, no support needed, and join them with 4X M2x12 screws.

Insert into tires (compatible with my TPU insert V2), put the lip of the tire inside the hole, then attache a ring on each side with M2x8-10 screws.

The ring on the inner side can be hold with only 4 screws if you want to save some screws.

Use the provided hub (credit from black crow) for attaching to a standard axle pin. (print at 80% infill and put 4 screws in the hub to reinforce it)