March 17, 2025
Description
Cap adapter for the steel dispenser needle to add to a bottle of superglue. Provides precise control of the amount and placement of glue.
Easy clean clogs with a lighter lasts as long as the bottle of glue.
printed in PETG .15 layer height 4walls
the dispenser needle is a luer lock, and the threads are for a typical small bottle of glue
different gauges are available. The 14 gauge works well for me.
Insert the needle up through the cap from the inside and twist it to lock it in place.
It will leak a little around the cap on first use. I forced it to come out and spayed some accelerator on the outside to ensure a seal.
The needle tip fits a 14-gauge applicator, and it press fits onto the tip to prevent spills. However, it may not be needed if you have smaller needles.
Amazon parts that are compatible :
License:
Creative Commons — Attribution — Noncommercial
9
Badger
