Spinning buttons - gears, compass and more

Different types of spinning buttons - easy to print, can use multiple colors if needed.

Designed in Fusion 360.

Printing Instructions

• Printed in PLA at 0.1 to 0.2mm
• Color change is  in 3MF files, or add your own - outer ring is higher in most designs
• Prints within 10 minutes, can scale up if needed

Assembly

• Prints in place, just might need to pinch the middle part between your fingers and turn the ring a few times to loosen it up

If you print this, please post a make. Feedback and suggestions are appreciated!