Loxodon, Elephantfolk Warlock 25mm (DND / TTRPG)

Here are two variants of a Loxodon Warlock - the trident version could be a Paladin too fairly easily. The AI output a funky version with what it thought was a spear (idk what it was doing) - it seems like a weird elephant trunk / magical spell focus so I kept it mostly intact but thickened it up. I also added a version with a chonky trident model that I had too.

Overall with this model I did the usual thickening up, chonking (skewing by height and scaling back up) and then sculpting to pop out some armor details. As usual with any models with capes there was a gap in there that needed to be filled and I did the usual post-processing to make sure that this model will print nicely.

I print using a 0.2mm nozzle at 0.08mm and 100% infill - usually with the models on their back (-90 degrees on the x axis) - in general, for best results, I would recommend using the version without a baseplate and then glueing the model to the baseplate but I print with the baseplate to show that it can be done.

Category: Other