Desktop Pen Holder and Organizer

This simple desk organizer and pen/pencil holder allows for plenty of storage in a compact package.

The item prints in 3 parts which can be glued together (I use CA glue) to make the final object. Each part is designed with supporting structure for the glue up, and assembly should be fairly intuitive - please note that the tray must be glued in first, as it acts as a support piece for the shelf above. The tray should be oriented to print flat to the bed and the shelf should be oriented with the front side flare and the down support front edges flat to the bed (these surfaces have coincident angles/surfaces). In this way, no part requires support.

The make featured was printed in Prusament PETG with a 0.4 nozzle at 0.2mm layer height. Any filament should work just fine.