May 19, 2025
Description
Some simple barrels for DND and TTRPG games. I've got a single barrel then a set of 3 and 5 on their sides. I also skewed the single to be 30mm wide by 40mm tall as a wine vat (for anyone doing the winery in curse of strahd this may be helpful for you!!)
After some review - I've added some larger variants here a 28mm version which would work out to about 6ft tall. It's maybe too big but ends up being more sizeable scatter. Additionally I've added a 70mm variant and a hollow version of it (with an optional lid) - I went through the effort of cleaning up the overhanging faces on the 70mm variants so that they don't need supports. At some point I may revisit the stacks and make them 28mm stacks but we'll seee about that later.
Models that don't need to be printed with supports:
The 70mm hollow version saves a bit of material and print time - in exchange for maybe more painting that needs to be done. It's maybe only a 30% reduction tho and if printed at 0.2mm or greater with only a little infill (5-8%) the savings might not be worth it.
License:
Creative Commons — Attribution — Noncommercial
8
adamnant
