Purdue P Cribbage Board

Files include:

• The cribbage board
• A small segment to test settings and verify the fit of your pegs
• A wall hanger meant to use a 3M strip

Note: The model in the image accidentally has 6 holes in the second to last segment. This has been fixed in the version of the file I uploaded.

The board can fit on a 250x250mm build plate if rotated 70 degrees

The model is intended to be printed with 3 or 4 color changes between layers at the following heights: 16.2mm, 16.8mm, 17.4mm. I did an extra change at 15.6mm from black to white so the majority of the print is black.

Here are the pegs I ordered: https://a.co/d/fLHLFOm

If using other pegs, I suggest printing the test piece and scaling the board if needed so your pegs fit.