Link2Home Extension Cord Reel Mount for 3" Slatwall

I needed something to mount the Link2Home extension cord reel I bought from Costco to my Storewall so I've created yet another custom holder.

Uses 3x M5 20mm length bolts and nuts from this kit here:  https://www.amazon.com/dp/B07HVRJW5J

Seems to hold plenty strong with just those bolts.

Uses the same base clip as my other Slatwall models.  For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed.

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but you should file the little latching nub down as needed to avoid any damage.  Don't force it onto your wall if you feel too much resistance.

These must be printed on their sides for strength.  If you have good build surface adhesion you can get away without a brim, but the little thin part that latches up into the Slatwall has a tendency to warp and pull away from the build surface.

Update 2/16/2026
Widen base model from 2" to 3" for additional strength, as the weight of the cord reel tends to deflect the part away from the slatwall.