Arduino UNO network shield stand offs

For a few new robot projects using some old but good Arduino UNO I needed to use the common network shield which required some stand offs to hold the shield in place on the UNO with a height of 14.25mm between the UNO and the shield. 

I used the new sequential printing method within Prusa Slicer 2.9.1 to avoid stringing between the 8 needed stand offs to print them separately after each other:

To me one of the best inventions in Slicers since years and one I always wanted. 

Thanks to the Prusa Dev and QA team. 😊

Printing instructions:

• 0.2 speed profile used
• No supports needed
• Brim activated 
• Sequential printing output activated in Prusa Slicer 2.9.1
• Infill: 100%

Happy printing =)