Low Profile Dampened Panic Button for Car Key Fob

Background: This is a replacement for the panic button on common automotive remote key fobs. The panic button is fairly easy to activate inadvertently when the fob is in a pocket. This model is a replacement button that has a lower profile, to make it a little harder to press. 

Recommended print settings:

• Material:  PLA / PETG
• Layer Height: 0.15 mm 
• Infill % : 100
• Supports: Yes
• Print Orientation: Default as modeled
• Brim: No

Installation

1. Separate the fob pieces            
2. Remove the circuit board assembly   
3. Replace the Red Button with the printed part.  
4. Carefully reassemble in reverse order of disassembly.