WAGO Dispenser for 221

A practical connector dispenser for item numbers 221-413, 221-423 or 221-483 with a belt holder or with a magnetic base (5 mm x Ø 18 mm). 

Assembly is performed as shown in the figure: 
1 Position the housing. 
2 Insert the belt clamp through the lever. 
3 Insert the locking device. 
4 Insert all the parts into the housing. 
5 Secure it using the sample connector holder. 
6 Optional: Use a sample connector. 
7 Fill the housing with connectors and set the cover in place. 
8 Optional: Insert and attach a magnet to the bottom of the housing.

• Material: PLA 
• Extrusion width: 0.4 mm 
• Layer thickness: 0.1 mm for cover, all others 0.2 mm 
• Infill: 20 % 
• Bottom fixed filler layers (bottom layers): 5 layers 
• Upper fixed filler layers (top layers): 7 layers 
• Support structure: Only required for sample connector holder and belt-clamp recess

Check out the design on WAGO Creators