BMW X1 2023 Wireless Charging Pad Dual

A charging pad designed in the exact dimensions of the BMW X1 dashboard that can fit inside two (2) Baseus Simple Mini3 15Watt wireless chargers (https://www.baseus.com/products/simple-mini3-magnetic-wireless-charger-15w), connected to the type-C usb ports of the BMW. The chargers are carefully positioned to work with most new android and iPhone models (tested with several iPhone 6.1 models and all Galaxy S sizes).

The chargers are inserted from the back of the pad and have only 2 layers (0.4mm) distance from the phones. Cable is routed to the right side and excess can be hidden under the armrest.

I chose Baseus Simple Mini3 because it's relatively cheap, reliable, works flawlessly both with iPhone (magnetic) and android and is only 6.1mm thick. Of course you can remix this model to fit your charger of choice.

Variations:

There are four variations of the model:

Short Version: Requires less filament (approx. 40 grams with 10% infill) and provides clearance for cameras if used without a case but does not look that nice.

Full Version: More filament usage (approx. 70 grams with 10% infill) and does not allow most phones to sit flash if used without a case but you can hardly tell it's there.

Single: Single charger version for one phone, both in short and full versions.

Printing Instructions:

No supports are required, just print it with 3 or more walls and 3 or more bottom and top layers and 10% or more infill.

I printed it in Creality translucent blue PETG and Extrudr Flex Semisoft TPU (85A) and both versions work just fine, PLA is not recommended since it will deform from high temperature during charging.

Enjoy!