ESP32 38-Pin WLED Case

Snug snap-fit case for an ESP32-WROOM 38-Pin devkit USB-C. Hole at the back for a cable (can easily fit a 5mm wide 3-core or anything similar).

This was designed for a specific ESP32 board I got from Ali and couldn't find a nice fitting case for. I've included the picture, but it has the antenna not protruding out of the back of the board. It lists approx dimensions as 54 x 28 x 10mm. 

Case comprises of a base, with room for pins and cables, a tray for the ESP32 USB-C to sit in, and a click-lock lid. Lid secures nice and tight, and the board is a perfect fit.

I print mostly in PETG, but it's a fairly simple model so most filaments should be fine.

Hope someone finds it useful :)