ESP32 Cam Snap Fit Case for Pin Headers

As an Amazon Associate I earn from qualifying purchases.

I really liked the "Smallest Possible" case design created by MagnusT, but needed to modify it for my own uses. I wanted a case that would fit an esp32 cam with pin headers installed, and I wanted a snap fit case. I also did not have use for the original bracket mount, and made a place on the back to glue a universal ball joint. I have printed a half dozen of these cases to help house cameras for time lapse efforts.

One model has a port for USB, and one does not. I power the model without USB with wires that run through one of the vent holes.

The links above to the micro USB and ESP32 Cam are amazon affiliate link to the specific items I used.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

**Rafts:**

No

Supports:

No

**Resolution:**

0.2mm

How I Designed This

I took the original model, and removed some ventilation from the back, extended the front of the case and added snap fit nibs to hold the back in place.

As an Amazon Associate I earn from qualifying purchases. If you'd like to support my efforts, here is an Amazon Associates link that you can use to shop for whatever you need. Your purchases on items you need help me to continue this work.

Category: Electronics