Travel Tobacco Container with Ball Jar Screw Top

This is a screw top container that accepts regular mason / ball jar lids. An insert is included for adding printed labels.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

**Resolution:**

0.2mm

Infill:

20%

**Filament:** eSun PLA+ or PETG

Notes:

As an Amazon Associate I earn from qualifying purchases.

Glass quarter pint jars are ok in a travel bag, but I have had some break on me. I designed this simple to print jar that takes regular Ball Lids and Bands for an air tight seal. I use the round disk as a lid insert for attaching labels. These lid inserts work for the regular glass jars too. Links above are Amazon affiliate links and help support my efforts!

Supports are not needed as overhangs are about 60 degrees from vertical, but wall ordering should be set to "inside to outside".

I would not recommend using these containers for long-term storage or cellaring due to the porous nature of 3D printed plastic. Containers that I have forgotten about at the bottom of my bag have kept things fresh for more than a couple of weeks. (Edit 20-Nov-2024: I found one of these full of pipe tobacco at the bottom of a bag I used for travel back in August. The tobacco is still fresh and supple.)

As an Amazon Associate I earn from qualifying purchases. If you'd like to support my efforts, here is an Amazon Associates link that you can use to shop for whatever you need. Your purchases on items you need help me to continue this work.

Category: DIY