Honda Del Sol Bezel Button Faces (Aux. Lt, Cruise, Defrost, Hazards)

The Bezel buttons on the Honda del sol are well known to fade really badly over time, I created replacements for them. I printed on a carbon fiber plate, but you can use whatever texture you like.

IMPORTANT: To use these as shown you will need to remove your old button faces and the transparent backing, and you will need to lightly modify the openings on the button bodies of Aux Lt. and Cruise where the light comes through to illuminate fully (this is because I had to make the lettering larger to print properly and so the small opening won't light them all the way on the sides if you don't file/grind the square opening a little larger), you don't have to remove much, maybe 1/8th in on each side.

PRINT SETTINGS:
1. Use whatever hard filament you want
2. Print these extra SLOW, like 30 or 40mms to make sure the tiny details are clean
3. You need transparent filament if you want to use the clear backing (you don't HAVE to use them but they disperse the light evenly, not having it looks kinda cheap and weird)
4. You can use either a .4 nozzle or .2, .2 prints more cleanly but .4 is still very sharp and good

If you would like to leave a tip for my hard work you can do so here :D  https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ