Cable manager box for RG35XX H, proto

Cable manager box for Anbernic RG35XX H and Ugreen CM219 USB hub.
It's a prototype.

It was printed with PETG. The lid can be printed in vase mode with 0,6 or bigger nozzles. (line width is 1 mm)

You may need:

-self adhesive feet to make case non-slip
-tape to add some padding. The clearance of the console is on the loose side.
-Double sided foam tape to secure the USB hub.
-a short pieace of tubing (8 mm OD) to secure the HDMI cable into its slot. Push the tubing into the slot, on top of the HDMI cable.