1/8" 3.5mm Audio Jack Panel Mount

This is a simple build. Print the two halves. Screw the audio jack into the body. Press an M3 nut into each of the nut recesses in the back piece.

At the panel, cut a 9.5mm hole for the body to fit through your panel using the template, and drill two 3mm (or slightly larger) holes for the two M3 screws.

Press the back against the panel, align the nuts with the screws and evenly tighten.

Parts List

Links are Amazon Affiliate Links. These cost nothing extra for you to use, but I receive a small commission that helps support my work.

M3 x 10 (or longer) screws and nuts x2
Stereo Jack - https://amzn.to/4l9e08D

Notes

This was only designed for the type of jack linked in the parts list. There are others like this that should fit, but only the one linked is mostly guaranteed.