March 24, 2025
Description
Intro Notes: I converted my Longer LK4 Pro to direct drive and needed a way to use the stock filament run out sensor with my direct drive adapter. This allows you to mount the run out PCB and switch to this housing, connect a compression fitting and connect it to a PTFE tube.
Print Parameters: 0.4mm Nozzle, 10% Infill, 0.2mm Layer Height, 3 Vert.&Horz. Shell layers.
Additional Hardware:
LK4 Pro Filament run out sensor and its two fasteners.
License:
Creative Commons — Attribution — Share Alike
7
Excuse
