December 23, 2022
Description
Because in a world rapidly moving to wireless everything, we need more cable hangers.
YES it is quite light, and
YES it will move a bit if you tug on it, and it will probably bend alarmingly if you hang your overcoat on it.
YES it has the capacity for more cables than you probably need.
YES you can stop it moving (if that bothers you) with a tiny dab or two of hot glue or double sided tape. Personally I don't mind the little bit of tactile play that comes with it, but I get why some won't want to see it sagging in the middle when heavily laden. (If you use hot glue you can easily remove it by warming it a little with a hair dryer).
Printed in PLA - this example in Prusament "Lipstick Red" PLA in 0.20 QUALITY mode in PrusaSlicer.
Because those slender tines can be difficult to print cleanly if they start vibrating, I suggest you orient it on the build plate as shown.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Peter H
