USB, SD, and Micro card Holder. 6x USB-A, 2x USB-C, 10x SD, 12x Micro SD

I went looking for an SD hard holder and there are a lot of them.  Most of the holders I saw had too few slots for cards ( not enough for my needs ).  So I decided to make one myself.  You like, Great!  You don't like, Fine.

This can hold 6 USB-A thumb drives, 2 USB-C drives, 10 SD Cards, and 12 MicroSD cards.

Maybe the unique thing this does is the USB devices are “fanned” out and the SD cards are divided and on angled faces … to make them easier to grab, I guess.  Spacing is completely arbitrary - it “felt” compact enough, but still usable.

I printed the one in the photos in ABS on my Qidi Plus-4 at 0.24 layer height.  This took about 1.5 hours to print.  It looks a little rough to me - sort of industrial.  I would suggest a finer layer height and don't print in black.  Print it in gray or something lighter to provide contrast for the black SD cards.

NOTE on tolerances:

These slots are all sort of loose by at least 0.5mm.  Hopefully it shouldn't matter if you are printing exclusively or inclusively or right on the bead centerline.