March 25, 2025
Description
As the title says, a canopy/mount for the VTX/camera for a Emax Wyvernlink 100mw OpenIPC system for BFPV frames. Print at .16 optimal with at least 2 walls 3 top 3 bottom and 15% infill. with some pressure screws with thread in. I used the stock gummies for the VTX and short M2 screws to mount the canopy. Two small zip ties used for the antennas.
M1.4 4mm screws used for camera since Emax decided to be weird
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Hashi Maru
