Magnetic Levitation Tower

Parts Required

• 3x 4.5mm cube magnets

Print

• 1x Holder
• 2x Base-Top
• 4x Pillar

Assembly

1. Push a 4.5mm cube magnet into the center of the Top, Bottom and Holder (Top and bottom should repel opposite sides of the holder)
2. Push the Pillars into the Bottom
3. Place the Holder between the pillars (making sure it is being repelled by the Base)
4. Push the Top onto the pillars (this time make sure it is being repelled by the Top)
5. Push top down until Holder is stable horizontally