Modular Spool Holders for Anycubic Kobra Plus (Maybe other models too) lets you store up to 4 instantly Usable spools.
This might fit other Anycubic models, but please check by printing the insertable nut and checking if it can slide into your frame. See pictures for frame type.
Filaments used :
https://www.prusa3d.com/product/prusament-pla-prusa-galaxy-black-1kg/
https://www.prusa3d.com/product/prusament-pla-prusa-orange-1kg/
Instructions:
- Please print the slidebolts at 100% density to make sure they don't break on install (not much longer to print at 100%)
- Unscrew the top part of the frame
- Slide in the slidebolts by alining them carefully, then tapping gently on the lower part with womething solid
- Align the printed main frame's holes with 2 slidebolts
- Screw the star nut that will be located within the frame first, then the second one
- Screw in the crossrod (Filleted rod)
- Screw in the barrels (Barrels are sized for 1 kg Prusament spools so they rotate best)
- Add the spools (Make sure to balance weight if possible, otherwize consider printing the main frame at a higher density)
Current properties :
- Main frame 30% density/ infill
- Slidebolts 100% density
- Crossrod 100% density
- Spool holder caps 100% density
- Spool Barrels 30% density
- Starnuts 100% density
All prints were made respecting prusa's recommended temperatures.
Joseph Adam Lecomte
