Replacement bracket for Toptrek folding bike lock

My bike lock kept falling off my bike because the original bracket had a much too loose fit. Therefore, I created this bracket which has a much more secure fit to the bike and to the lock. It is made to fit a Toptrek folding lock of this model:
https://www.amazon.de/-/en/dp/B07GFB4H96?ref=ppx_yo2ov_dt_b_fed_asin_title

I don't know if there is anyone out there with particular lock who sees this, but if you do, know that this is an upgrade over the original piece. It looks a little dirty in the photos because I use it every day.

Printed in PETG without supports and secured to a 1.45cm frame with two 4x20mm screws which screw into 7mm nuts. Both .stl and .step files are attached. If you need to modify the design to fit your use case, you can modify it from the Onshape model below:
https://cad.onshape.com/documents/ad302b8d99dc075f1720341a/w/99347ce7f6108ba1d4326f07/e/61399ce568f965f8f341e745

I you use the Onshape link then please leave a make here so I know it was of use to someone :)