Icom IC-2350H Cage

I was given an Icom IC-2350H VHF/UHF 50watt radio and I want to make a manpack out of it. However I'm too cheap to purchase an aluminum cage and I own a nice 3D printer. My Fusion360 skills are limited but I'm getting better. This is my first design of a cage and it turned out awesome. Fits like a glove. 

Printing

I printed the prototype in PETG with 3 walls/3 tops/3 bottoms and 30% infill and it worked great, very strong.

The final version is printed in PETG-CF with 6/6/6 and 50%. Needless to say it would take alot to break this. I've been using Polymaker PETG-CF Fiberon and really like it. 

There is only one STL file, they are symmetrical so print two and bolt them on both sides.

Links

MLok Nuts - https://www.amazon.com/dp/B0B845WY3D?ref=fed_asin_title&th=1

Related Models

I have also designed relocation brackets for coax and audio. The slots are designed to MLOK specs and fit very well. You might have to take a file and smooth out the inside of the slots just a touch depending on your printer.

MLOK Relocation Bracket BNC + Audio - https://www.printables.com/model/1249507-mlok-relocation-bracket-bnc-audio

MLok Relocation Bracket BNC - https://www.printables.com/model/1249510-mlok-relocation-bracket-bnc

MLok Relocation Bracket Powerpoles - https://www.printables.com/model/1253722-mlok-relocation-bracket-powerpoles

MLok Relocation Bracket Digirig - https://www.printables.com/model/1262868-mlok-relocation-bracket-digirig

Wire Antenna Insulator - https://www.printables.com/model/1262898-antenna-wire-insulator