Route Werks double Bar Fly mount

Adapter fits two bar fly style mounts on the lid of a Route Werks original handlebar bag.

Note that the holes are sized to self-tap (aka: force) M3 screws through so you can use generic 20mm spaced bike computer mounts. BarFly uses M4 holes, so you will need to drill them out a little to 3.5mm or 9/64" and, depending on the tech mount, countersink them. One side also has holes to fit M4 nuts.

This adapter needs the Route Werks's Bar Fly adapter. and I have also use some double sided tape to hold down the sides a bit more so my light doesn't vibrate.

I wasn't thinking and printed this right side up with supports. It can probably be printed upside down with no supports. That would also allow a version to be printed that does not need the Bar Fly adapter on the lid.