**************This is only the center part, see my other models for the basic quadri-spooler kit****************
Instructions:
- Please print the slidebolts at 100% density to make sure they don't break on install (not much longer to print at 100%)
- Align the printed main frame's holes with 2 slidebolts already in place from the 4 spool holder
- Screw in the star nuts
- Screw in the crossrod (Filleted rod)
- Screw in the barrels (Barrels are sized for 1 kg Prusament spools so they rotate best)
- Add the spools (Make sure to balance weight if possible, otherwize consider printing the main frame at a higher density)
Current properties :
- Main frame 30% density/ infill
- Slidebolts 100% density
- Crossrod 100% density
- Spool holder caps 100% density
- Spool Barrels 30% density
- Starnuts 100% density
All prints were made respecting prusa's recommended temperatures.
Joseph Adam Lecomte
