Adjustable pipe connector

Bottom pipe connector with leveling foot, I've designed this for a folding camping organizer/cabinet with aluminium tubes because the original connector broke. I've added the leveling foot for a little adjustment, it was modeled after the original part. This is used to make a frame with my other model, which is found at the bottom of this description.

The upright pipe measures 25,15mm (0,99") the horizontal pipes measure 22,65mm(0,89'') this already accounts for some clearance for the aluminium pipes, depending on the accuracy of the printer and/or the pipes it might be necessary to place the part in hot water to soften it a little bit and then insert the pipe to make it a snug fit.  

Printed on a MK3S+

• Material: PLA
• Infill: 20%
• Layer height: 0.30 mm
• Supports: snug supports only on bed
• Print orientation: as shown in print screen
• Print time: 3h 38min
• Variable layer height adaptive 0.40

Also check out my other pipe connector! https://www.printables.com/model/1251906-pipe-connector