A bit holder to store your rotary bits. Don't have 2.3mm, 3.15mm, or 4.3mm bits? Modify it on OnShape with the built in configurations!
Assembly:
- Friction fit the D10x3mm (Or any D10 magnet) magnets into the larger holes.
- Screw the 6mm M3 screws used to attract the magnets in the main body.
- Use 12mm M3 screws to screw the main body into the holder on both sides.
Features:
- No glue needed
- Holes are threaded to make it easy to assemble
- No post modification only assembly
- Able to modify the amount of storage
- Able to modify what screw type you want (Must click on the hole features)
- Two different hole sizes are possible in the configuration
- Open source inducing sketches, not just shape file
Notes:
The magnet screws may interfere with the storage holes, so modify Magnet Screw Position from Side so it does not intersect or use a sorter screw in Magnet Screw Length.
ZekromVale
