February 10, 2026
Description
The Pea is a 1:10 scale display model inspired by older micro-cars.
Total assembly: Roughly 15 x 11 cm
Filament: We used roughly 150 g of filament using 5% infill.
Largest single part: 105 x 136 x 105 mm
Easy assembly!
Rolling wheels
Openable door
Resolution: 0.2 mm layerheight
Infill: 5%, or lightning infill
Supports: Yes, we recommend using organic supports!
Brim: Advised against warping, not mandatory!
Parts like the spoiler, seat and steeringwheel can be glued to the body
The wheels can be glued to the axles and snap into place
The door can be attached using a piece of filament!
Fitment: Fit check any parts before permanently attaching them! Some parts may need sanding or filing!
Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: [email protected]
Feel free to share your makes with us on here, or over on Instagram and tag us using @stllabs
(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
STLLabs
