IKEA Lack Riser / Leveling feet 3D printer stand

This model can be easily printed and is speciffically designed to be strong and to help you level an IKEA Lack table on an uneven surface and raise it a bit. Also, TPU feet can be helpful to reduce printer vibrations (if used as a printer table) and grip the floor. 

Leg adapter piece should be printed without any support, ensure good bridging. 3 wall loops, infill is your choice.

Screw part should be printed without support, 3 wall loops, infill is your choice.

TPU insert should be printed without supports, 3 wall loops and 30%+ infill depending on your stiffness desires. That part shloud be just pressed into the screw with moderate force to snap fit.

Tolerances for threads are added, make sure to use a little bit of grease to operate more smoothly.