Poop Emoji stl Keychain in Breakable Mystery Easter Egg- Serev3D

By popular demand, the Breakable Eggs are making a comeback!

🥚the Poop Emoji keychain comes printed inside the egg 
🥚The egg might look simple at first sight, but you will need to break it to find the hidden Poop Emoji inside ! Super fun and original Serev3d concept!
🥚Multicolor 3mf and reusable egg version available on our Serev3D Patreon
🥚The ducks can be used as keychains after opening them from the eggs.

IMPORTANT: Make sure to keep the scale of the egg, do not resize it, we made sure that printed at 100% size the printer will use a single layer of wall on the shell to crack it easily. If it's scaled down or up too much, it will not print well at all, or it will be extremely hard to crack!
 

How to break the egg :
(the baby chick in the example gif is from our Three Wise Chicks designs, published here on printables.)

Pretty simple, find the line of the seams at the back of the shell, don't be scared to press hard to pierce it. We also added a tiny little break in the back to make it easier to open. Once you see the Mystery Designs inside, you can push it down and the bottom seal will break too. At the end, you can remove the platform. We also painted a multicolor 3mf version, if you have a multicolor printer.

INFO:
Print difficulty level: Beginner
Printing time: less than 45min

Recommended print settings:
(If you use Bambu or Orca slicer, ALL the print settings are automatically loaded in each version’s 3mf files)
-Layer height: 0.2mm
-Wall loops: 2
-Infill: 7%, Gyroid
-Supports: No supports needed for this design!

NOTE: if your slicer gives you a warning about "floating regions" in the object, you can ignore the message, the prints were tested beforehand, and it all works perfectly.

We are looking forward to see your prints, Show us your finished results in the comments!

Check out our Patreon exclusive designs too, we have a lot more awesome things to print: 

🔹 Join SEREV3D on Patreon & unlock everything!