Gridwall Tray / Bin - no supports

Here is a simple gridwall tray, approx 5" square (13 cm). It is sized to fit in between the upright wires. Also designed to mount with the horizontal wire on the back side of the gridwall (see photos). A helper disk on the bottom of each of the hanger hooks is very helpful (see photo). I suggest using 4 perimeters, and 15% to 25% cubic infill. There is a small ‘bump’ (see photo) on the inside of the back hanger finger to create a ‘snap’ fit onto the wire to hold securely. This bump can be trimmed or shaped to suit the fit you desire.

Please post any questions, comments or makes!