Fly SHT36v3 and PUG Mount for VZHextrudort

I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3.  I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to mount to the back of a VZHextrudort.

You'll need the following:

• 4x M3x8mm screws to mount the standoffs to the NEMA14 and the mount to the standoffs (I used a couple of 20mm ones from https://www.printables.com/model/601831-m3-standoff-spacer-female-female-round-4-30mm)
• 2x M3x6mm screws to mount the SHT36 toolhead board
• 1x PUG gland for the appropriate cable size you'll be using ( PUG (Parametric umbilical gland)
• 1x PUG bracket from WWG2 NH36/EBB36 PUG mount  (attached it here for your convenience)
• 2x M3 Heatset inserts for the PUG mount